GTX 1050 Ti Driver Bug History & Rollback Guide

A driver bug history & rollback guide for the GTX 1050 Ti. NVIDIA 4 GB GDDR5, ~75 W. Last updated 2026-03-17.

Why your GTX 1050 Ti feels off

You bought the GTX 1050 Ti expecting smooth frames, and instead you got a slideshow with a side of anxiety. Most owners we hear from are chasing VRAM-related texture pop-in that gets worse the longer you play on a card that is perfectly healthy — it just has not been tuned for their resolution, their game, and their case airflow.

This guide is the no-fluff version. It assumes a North American gaming rig, US-spec hardware, and that you would rather spend twenty minutes tuning once than fight stutter for the next year.

Symptom checklist

Before changing anything, confirm which of these you actually have. The fix differs:

• Frames are high but the game still feels rough — you have a 1% low problem, not an average-FPS problem.
• GTX 1050 Ti fan ramps loudly the moment a heavy menu loads — that is a thermal headroom issue.
• Stutter started right after a driver update — that is a driver regression, not a hardware fault.
• Texture pop-in worsens the longer you play — that is VRAM streaming, common on 4 GB cards at high settings.
• Colors look washed out after toggling HDR — that is a game/HDR handoff bug, not a tuning problem.

Root cause analysis

Nine times out of ten the GTX 1050 Ti is limited by one of four things: a power curve that leaves thermal headroom unused, a driver branch that regressed 1% lows, a VRAM ceiling at 4 GB that forces streaming, or a fan curve tuned for silence instead of clocks. The Driver Bug History & Rollback lens narrows that list: the single highest-leverage fix is the driver version itself — a known-good branch resolves issues no in-game setting can.

The spec line for context: NVIDIA GTX 1050 Ti with 4 GB GDDR5, ~75 W TDP, released 2016. Keep those numbers in mind — they decide which preset your hardware can actually sustain.

Step-by-step: Driver Bug History & Rollback for the GTX 1050 Ti

1. Baseline first. Bench the GTX 1050 Ti at stock with your real game for 10 minutes and note avg FPS, 1% lows and hotspot temp. You cannot tune what you have not measured.
2. Clean the driver. Boot Safe Mode, run DDU (Display Driver Uninstaller) in Safe Mode, then install the 560.94 or 551.86 anchor. Block auto-updates in GeForce Experience / NVIDIA App.
3. Set the power curve. In MSI Afterburner (or GeForce Experience / NVIDIA App), apply the Low preset's power limit first (61 W). Test 20 minutes.
4. Add the memory offset. Nudge +400 MHz, test, then push toward the Med value only if artifact-free.
5. Tune the fan curve. A curve that hits 85% by 75°C keeps the GTX 1050 Ti out of throttle territory without screaming at idle.
6. Re-bench and compare to your baseline. If 1% lows did not improve, the limiter is elsewhere — check the calculator below.

Low / Med / High tuning presets

Three presets, each validated for 1080P, 2K and 4K. Start at Low, confirm 20 minutes of stability, then step up. Copy the block that matches your resolution.

Low / Eco

Lowest heat, quietest fans, best for old laptops and 1080P marathon sessions. Est. ~69 FPS.

• Power Limit: 68 W
• Core Clock Offset: +0 MHz
• Memory Offset: +0 MHz
• Fan Curve: Quiet (40–70%)
• Ray Tracing: Off
• Upscaler: Quality

Estimated FPS — 1080P: ~69, 2K: ~39, 4K: ~19.

Med / Balanced

Balanced daily driver — most of the frames, none of the drama. Est. ~55 FPS.

• Power Limit: 79 W
• Core Clock Offset: +90 MHz
• Memory Offset: +400 MHz
• Fan Curve: Balanced (45–85%)
• Ray Tracing: On (medium)
• Upscaler: Balanced

Estimated FPS — 1080P: ~55, 2K: ~31, 4K: ~15.

High / Maxed

Maxed-out preset with RT; validate cooling and PSU headroom first. Est. ~43 FPS.

• Power Limit: 84 W
• Core Clock Offset: +180 MHz
• Memory Offset: +900 MHz
• Fan Curve: Aggressive (55–100%)
• Ray Tracing: On (ultra)
• Upscaler: Performance

Estimated FPS — 1080P: ~43, 2K: ~24, 4K: ~12.

1080P / 2K / 4K resolution-specific settings

Resolution changes the limiter, not just the frame count. At 1080P the GTX 1050 Ti is usually CPU-bound — push the upscaler to Quality and turn RT on. At 2K the GTX 1050 Ti becomes bandwidth-bound — Balanced upscaling and a memory offset help most. At 4K you are fill-rate-bound — drop to Performance upscaling and accept that RT is a luxury, especially on an 4 GB card.

| Resolution | Upscaler | RT | Expected FPS (Med) | | --- | --- | --- | --- | | 1080P | Quality | On (medium) | ~55 | | 2K | Balanced | On (medium) | ~31 | | 4K | Performance | Off / light | ~15 |

Driver version bug history & rollback

The biggest single tweak for the GTX 1050 Ti is often the driver version, not any in-game setting. NVIDIA ships good branches and bad branches; running a known-good one costs nothing and fixes a surprising number of "hardware" complaints.

Known-good anchor: 560.94 or 551.86. Known-bad: 555.85 (black screens on some RTX 30/40 cards after sleep).

Rollback in five steps: boot Safe Mode, run DDU, install 551.86 or 560.94, then disable auto-update in the NVIDIA App. Then block auto-updates in GeForce Experience / NVIDIA App so a bad branch cannot sneak back in.

The full per-version timeline for the GTX 1050 Ti is rendered as an interactive component above this section (Driver Version Bug History).

Old laptop & low-end PC lightweight section

Not everyone is on a fresh desktop build. If you are running the GTX 1050 Ti in an older laptop or a low-end PC with weak cooling, the goal flips: prioritize frame rate and thermals over eye candy.

• Lock the GTX 1050 Ti to the Low preset and cap FPS at your monitor's refresh or 60, whichever is lower — capped frames mean capped heat.
• Drop texture quality one notch and disable RT; on a 4 GB buffer this prevents the streaming stutter that punishes old laptops hardest.
• Clean the heatsink and repaste if it has been more than two years — a clogged GTX 1050 Ti in a thin chassis throttles no matter what software says.
• Use Windows "Best Performance" power plan and close RGB / overlay apps; they add surprise CPU load on low-end PCs.
• If the GTX 1050 Ti still thermal-throttles, undervolt (Low preset already does this) rather than underclocking — you keep the clocks when the chip is cool.

Common mistakes to avoid

• Chasing the High preset first. It is the least stable and the most likely to crash — always validate Low and Med first.
• Skipping the DDU wipe on a driver rollback. Layering a new driver over a broken one inherits the broken state.
• Treating VRAM usage as a vanity number. On the GTX 1050 Ti (4 GB), you want headroom, not 99% utilization — streaming stutter lives there.
• Ignoring case airflow. A GTX 1050 Ti in a dead-air case throttles identically to one in a 35°C room.
• Copying a streamer's settings verbatim. Their GTX 1050 Ti is in a different chassis, on a different panel, with a different CPU.

Before vs after tuning

Typical real-world delta on a GTX 1050 Ti going from stock to the Med preset, same title, same bench:

| Metric | Before | After (Med) | | --- | --- | --- | | 1080P Avg FPS | 55 | 65 | | 1080P 1% Low | 33 | 45 | | 2K Avg FPS | 31 | 36 | | Hotspot °C | 84 | 71 | | Fan Noise | Loud | Audible |

Your numbers will move with your CPU, RAM and case. The point is the shape of the change: averages up a little, 1% lows up a lot, temps down meaningfully.

Use the calculator before you commit

Before locking in a preset, run the numbers through the GPU FPS Estimator. It projects GTX 1050 Ti FPS at 1080P / 2K / 4K across Low / Med / High along with power and temperature, so you know which preset your cooling can actually sustain. If the estimator says 4K High is unreachable on the GTX 1050 Ti, save yourself the crash and drop to Med.

FAQ

Which GTX 1050 Ti driver version is the most stable?

560.94 or 551.86 is the recommended anchor for the GTX 1050 Ti. Test in your own titles before locking it in.

How do I roll back the GTX 1050 Ti driver safely?

boot Safe Mode, run DDU, install 551.86 or 560.94, then disable auto-update in the NVIDIA App. Always wipe the current driver with DDU (Display Driver Uninstaller) in Safe Mode first.

Why did 555.85 (black screens on some RTX 30/40 cards after sleep) break things?

Vendor release notes for that branch list regressions; on the GTX 1050 Ti it manifested as stability and power issues.

Will these tweaks help an old laptop with the GTX 1050 Ti?

Yes. The Low preset and the old-laptop section below specifically target thermals and frame-rate stability on constrained cooling.

What if the GTX 1050 Ti crashes after applying the High preset?

Step back to Med, retest for 20 minutes, then nudge one parameter at a time. Most crashes come from too-aggressive memory offsets or insufficient PSU headroom.

Summary

The GTX 1050 Ti rewards a methodical hand. Anchor on a clean 560.94 or 551.86 driver, start at the Low preset, validate, then step toward Med. Reach for High only when your cooling and PSU headroom are proven. Pair every change with the matching calculator above and you will spend more time playing and less time guessing.

Related long-tail questions